|
|
|
|
![]() |
|
|
Capacity
Convenience
|
Freshness
Benefit
Luxurious |
| Features and Functions: | |
|
1- First Stage - Sediment Filter Small Particles are removed by a special material made of 5 micron polypropylene. |
5-
Noiseless, High Water Volume Pump Instead of the old AC type, the booster pump in the system used DC current to achieve the lowest noise while maintaining the highest water quality and quality even in extremely low pressure areas. |
|
2- Second Stage - Pre-Carbon Filter
Bituminous GAC pre-carbon made with intense heat to remove chlorine. Trihalomethane and other organic substances in the water. This filter helps to insure the normal function of the membrane. |
6-
A.F.S. (Automatic Flushing System) Improves manual waster water control system and extends the life of the membrane. The unit automatically "power flushes" substances and particles on the surface of the membrane. Thereafter, the system resumes back to its normal flushing mode. |
|
3- Third Stage - Forced Reverse Osmosis
Membrane Made of thin Film composite mixed with poly soften nylon and polyethylene. Water going through the membrane completely drains out contaminants by squeezing out chemicals and many other microscopic impurities. The contaminants are flushed to the drain. |
7-
P.L.C. (Pressure Level Controller) Safest alternative to the electric control system. Water flow automatically switches on and off depending on the capacity of the reservoir tank and water pressure in the tank. |
|
4- Fourth Stage - Post-Carbon Filter
Recognized as the best quality, it provides the natural taste in water by removing dissolved gases and odors through a high quality granular activated filter. |
|